#ifndef ESPEASY_CUSTOM_H #define ESPEASY_CUSTOM_H /* To modify the stock configuration without changing the EspEasy.ino file : 1) rename this file to "Custom.h" (It is ignored by Git) 2) define your own settings below 3) define USE_CUSTOM_H as a build flags. ie : export PLATFORMIO_BUILD_FLAGS="'-DUSE_CUSTOM_H'" */ /* ####################################################################################################### Your Own Default Settings ####################################################################################################### You can basically ovveride ALL macro defined in ESPEasy.ino. Don't forget to first #undef each existing #define that you add below. But since this Custom.h is included before other defines are made, you don't have to undef a lot of defines. Here are some examples: */ // --- Feature Flagging --------------------------------------------------------- // Can be set to 1 to enable, 0 to disable, or not set to use the default (usually via define_plugin_sets.h) #define FEATURE_RULES_EASY_COLOR_CODE 1 // Use code highlighting, autocompletion and command suggestions in Rules #define FEATURE_ESPEASY_P2P 1 // (1/0) enables the ESP Easy P2P protocol #define FEATURE_ARDUINO_OTA 1 // enables the Arduino OTA capabilities #define FEATURE_THINGSPEAK_EVENT 1 // generate an event when requesting last value of a field in thingspeak via SendToHTTP(e.g. sendToHTTP,api.thingspeak.com,80,/channels/1667332/fields/5/last) // #define FEATURE_SD 1 // Enable SD card support // #define FEATURE_DOWNLOAD 1 // Enable downloading a file from an url #ifdef BUILD_GIT # undef BUILD_GIT #endif // ifdef BUILD_GIT #define BUILD_GIT "My Build: " __DATE__ " " __TIME__ #define DEFAULT_NAME "lbweatherstation" // Enter your device friendly name #define UNIT 0 // Unit Number #define DEFAULT_DELAY 60 // Sleep Delay in seconds // --- Wifi AP Mode (when your Wifi Network is not reachable) ---------------------------------------- #define DEFAULT_AP_IP 192, 168, 4, 1 // Enter IP address (comma separated) for AP (config) mode #define DEFAULT_AP_SUBNET 255, 255, 255, 0 // Enter IP address (comma separated) for AP (config) mode #define DEFAULT_AP_KEY "configesp" // Enter network WPA key for AP (config) mode // --- Wifi Client Mode ----------------------------------------------------------------------------- #define DEFAULT_SSID "" // Enter your network SSID #define DEFAULT_KEY "" // Enter your network WPA key #define DEFAULT_SSID2 "" // Enter your fallback network SSID #define DEFAULT_KEY2 "" // Enter your fallback network WPA key #define DEFAULT_WIFI_INCLUDE_HIDDEN_SSID false // Allow to connect to hidden SSID APs #define DEFAULT_USE_STATIC_IP false // (true|false) enabled or disabled static IP #define DEFAULT_IP "192.168.0.50" // Enter your IP address #define DEFAULT_DNS "192.168.0.1" // Enter your DNS #define DEFAULT_GW "192.168.0.1" // Enter your Gateway #define DEFAULT_SUBNET "255.255.255.0" // Enter your Subnet #define DEFAULT_IPRANGE_LOW "0.0.0.0" // Allowed IP range to access webserver #define DEFAULT_IPRANGE_HIGH "255.255.255.255" // Allowed IP range to access webserver #define DEFAULT_IP_BLOCK_LEVEL 1 // 0: ALL_ALLOWED 1: LOCAL_SUBNET_ALLOWED 2: // ONLY_IP_RANGE_ALLOWED #define DEFAULT_ADMIN_USERNAME "admin" #define DEFAULT_ADMIN_PASS "" #define DEFAULT_WIFI_CONNECTION_TIMEOUT 10000 // minimum timeout in ms for WiFi to be connected. #define DEFAULT_WIFI_FORCE_BG_MODE false // when set, only allow to connect in 802.11B or G mode (not N) #define DEFAULT_WIFI_RESTART_WIFI_CONN_LOST true // Perform wifi off and on when connection was lost. #define DEFAULT_ECO_MODE false // When set, make idle calls between executing tasks. #define DEFAULT_WIFI_NONE_SLEEP false // When set, the wifi will be set to no longer sleep (more power // used and need reboot to reset mode) #define DEFAULT_GRATUITOUS_ARP false // When set, the node will send periodical gratuitous ARP // packets to announce itself. #define DEFAULT_TOLERANT_LAST_ARG_PARSE false // When set, the last argument of some commands will be parsed to the end of the line // See: https://github.com/letscontrolit/ESPEasy/issues/2724 #define DEFAULT_SEND_TO_HTTP_ACK false // Wait for ack with SendToHttp command. #define DEFAULT_AP_DONT_FORCE_SETUP false // Allow optional usage of Sensor without WIFI avaiable // When set you can use the Sensor in AP-Mode without beeing forced to /setup #define DEFAULT_DONT_ALLOW_START_AP false // Usually the AP will be started when no WiFi is defined, or the defined one cannot be found. This flag may prevent it. // --- Default Controller ------------------------------------------------------------------------------ #define DEFAULT_CONTROLLER true // true or false enabled or disabled, set 1st controller // defaults #define DEFAULT_CONTROLLER_ENABLED true // Enable default controller by default #define DEFAULT_CONTROLLER_USER "" // Default controller user #define DEFAULT_CONTROLLER_PASS "" // Default controller Password // using a default template, you also need to set a DEFAULT PROTOCOL to a suitable MQTT protocol ! #define DEFAULT_PUB "%sysname%/sensor/%valname%" // Enter your pub #define DEFAULT_SUB "%sysname%/sensors/#" // Enter your sub #define DEFAULT_SERVER "" // Enter your Server IP address #define DEFAULT_SERVER_HOST "" // Server hostname #define DEFAULT_SERVER_USEDNS false // true: Use hostname. false: use IP #define DEFAULT_USE_EXTD_CONTROLLER_CREDENTIALS true // true: Allow longer user credentials for controllers #define DEFAULT_PORT 1883 // Enter your Server port value #define DEFAULT_CONTROLLER_TIMEOUT 100 // Default timeout in msec #define DEFAULT_PROTOCOL 5 // Protocol used for controller communications // 0 = Stand-alone (no controller set) // 1 = Domoticz HTTP // 2 = Domoticz MQTT // 3 = Nodo Telnet // 4 = ThingSpeak // 5 = Home Assistant (openHAB) MQTT // 6 = PiDome MQTT // 7 = EmonCMS // 8 = Generic HTTP // 9 = FHEM HTTP #ifdef ESP8266 #define DEFAULT_PIN_I2C_SDA 4 #endif #ifdef ESP32 #define DEFAULT_PIN_I2C_SDA 21 // D21 #endif #ifdef ESP8266 #define DEFAULT_PIN_I2C_SCL 5 #endif #ifdef ESP32 #define DEFAULT_PIN_I2C_SCL 22 // D22 #endif #define DEFAULT_I2C_CLOCK_SPEED 400000 // Use 100 kHz if working with old I2C chips #define FEATURE_I2C_DEVICE_SCAN 1 #define DEFAULT_SPI 0 //0=disabled 1=enabled and for ESP32 there is option 2 =HSPI #define DEFAULT_PIN_STATUS_LED (-1) #define DEFAULT_PIN_STATUS_LED_INVERSED true #define DEFAULT_PIN_RESET_BUTTON (-1) #define DEFAULT_USE_RULES false // (true|false) Enable Rules? #define DEFAULT_RULES_OLDENGINE true #define DEFAULT_MQTT_RETAIN true // (true|false) Retain MQTT messages? #define DEFAULT_CONTROLLER_DELETE_OLDEST false // (true|false) to delete oldest message when queue is full #define DEFAULT_CONTROLLER_MUST_CHECK_REPLY false // (true|false) Check Acknowledgment #define DEFAULT_MQTT_DELAY 100 // Time in milliseconds to retain MQTT messages #define DEFAULT_MQTT_LWT_TOPIC "%sysname%/status" // Default LWT Topic #define DEFAULT_MQTT_LWT_CONNECT_MESSAGE "running" // Default LWT messages if connected #define DEFAULT_MQTT_LWT_DISCONNECT_MESSAGE "stopped" // Default LWT messages if disconnected #define DEFAULT_MQTT_USE_UNITNAME_AS_CLIENTID 0 #define DEFAULT_USE_NTP true // (true|false) Use NTP Server #define DEFAULT_NTP_HOST "de.pool.ntp.org" // NTP Server Hostname #define DEFAULT_TIME_ZONE 60 // Time Offset (in minutes) #define DEFAULT_USE_DST true // (true|false) Use Daily Time Saving #define DEFAULT_LATITUDE 0.0f // Default Latitude #define DEFAULT_LONGITUDE 0.0f // Default Longitude #define DEFAULT_SYSLOG_IP "" // Syslog IP Address #define DEFAULT_SYSLOG_PORT 0 // Standard syslog port: 514 #define DEFAULT_SYSLOG_FACILITY 0 // kern #define DEFAULT_SYSLOG_LEVEL 0 // Syslog Log Level #define DEFAULT_SERIAL_LOG_LEVEL LOG_LEVEL_INFO // Serial Log Level #define DEFAULT_WEB_LOG_LEVEL LOG_LEVEL_INFO // Web Log Level #define DEFAULT_SD_LOG_LEVEL 0 // SD Card Log Level #define DEFAULT_USE_SD_LOG false // (true|false) Enable Logging to the SD card #define DEFAULT_USE_SERIAL true // (true|false) Enable Logging to the Serial Port #define DEFAULT_SERIAL_BAUD 115200 // Serial Port Baud Rate #define DEFAULT_SYNC_UDP_PORT 8266 // Used for ESPEasy p2p. (IANA registered port: 8266) // Factory Reset defaults #define DEFAULT_FACTORY_RESET_KEEP_UNIT_NAME true #define DEFAULT_FACTORY_RESET_KEEP_WIFI true #define DEFAULT_FACTORY_RESET_KEEP_NETWORK true #define DEFAULT_FACTORY_RESET_KEEP_NTP_DST true #define DEFAULT_FACTORY_RESET_KEEP_CONSOLE_LOG true //#define BUILD_NO_DEBUG // Custom built-in url for hosting JavaScript and CSS files. #define CUSTOM_BUILD_CDN_URL "https://cdn.jsdelivr.net/gh/letscontrolit/ESPEasy@mega/static/" // Special SSID/key setup only to be used in custom builds. // Deployment SSID will be used only when the configured SSIDs are not reachable and/or no credentials are set. // This to make deployment of large number of nodes easier #define CUSTOM_DEPLOYMENT_SSID "" // Enter SSID not shown in UI, to be used on custom builds to ease deployment #define CUSTOM_DEPLOYMENT_KEY "" // Enter key not shown in UI, to be used on custom builds to ease deployment #define CUSTOM_SUPPORT_SSID "" // Enter SSID not shown in UI, to be used on custom builds to ease support #define CUSTOM_SUPPORT_KEY "" // Enter key not shown in UI, to be used on custom builds to ease support // Emergency fallback SSID will only be attempted in the first 10 minutes after reboot. // When found, the unit will connect to it and depending on the built in flag, it will either just connect to it, or clear set credentials. // Use case: User connects to a public AP which does need to agree on an agreement page for the rules of conduct (e.g. open APs) // This is seen as a valid connection, so the unit will not reconnect to another node and thus becomes inaccessible. #define CUSTOM_EMERGENCY_FALLBACK_SSID "" // Enter SSID not shown in UI, to be used to regain access to the node #define CUSTOM_EMERGENCY_FALLBACK_KEY "" // Enter key not shown in UI, to be used to regain access to the node #define CUSTOM_EMERGENCY_FALLBACK_RESET_CREDENTIALS false #define CUSTOM_EMERGENCY_FALLBACK_START_AP true #define CUSTOM_EMERGENCY_FALLBACK_ALLOW_MINUTES_UPTIME 10 // Allow for remote provisioning of a node. // This is only allowed for custom builds. // To setup the configuration of the provisioning file, one must also define FEATURE_SETTINGS_ARCHIVE // Default setting is to not allow to configure a node remotely, unless explicitly enabled. // #define FEATURE_CUSTOM_PROVISIONING 1 #define FEATURE_SSDP 1 #define FEATURE_EXT_RTC 1 // Support for external RTC clock modules like PCF8563/PCF8523/DS3231/DS1307 #define FEATURE_PLUGIN_STATS 1 // Support collecting historic data + computing stats on historic data #ifdef ESP8266 # define PLUGIN_STATS_NR_ELEMENTS 16 #endif // ifdef ESP8266 # ifdef ESP32 # define PLUGIN_STATS_NR_ELEMENTS 64 #endif // ifdef ESP32 #define FEATURE_CHART_JS 1 // Support for drawing charts, like PluginStats historic data // Optional alternative CDN links: // Chart.js: (only used when FEATURE_CHART_JS is enabled) // #define CDN_URL_CHART_JS "https://cdn.jsdelivr.net/npm/chart.js@4.1.2/dist/chart.umd.min.js" // JQuery: // #define CDN_URL_JQUERY "https://code.jquery.com/jquery-3.6.0.min.js" #define FEATURE_SETTINGS_ARCHIVE 1 // #define FEATURE_I2CMULTIPLEXER 1 // #define FEATURE_TRIGONOMETRIC_FUNCTIONS_RULES 1 // #define PLUGIN_USES_ADAFRUITGFX // Used by Display plugins using Adafruit GFX library // #define ADAGFX_ARGUMENT_VALIDATION 0 // Disable argument validation in AdafruitGFX_helper // #define ADAGFX_SUPPORT_7COLOR 0 // Disable the support of 7-color eInk displays by AdafruitGFX_helper #define FEATURE_SEND_TO_HTTP 1 // Enable availability of the SendToHTTP command #define FEATURE_POST_TO_HTTP 1 // Enable availability of the PostToHTTP command #define FEATURE_PUT_TO_HTTP 1 // Enable availability of the PutToHTTP command // #define FEATURE_I2C_DEVICE_CHECK 0 // Disable the I2C Device check feature // #define FEATURE_I2C_GET_ADDRESS 0 // Disable fetching the I2C address from I2C plugins. Will be enabled when FEATURE_I2C_DEVICE_CHECK is enabled // #define FEATURE_RTTTL 1 // Enable rtttl command // #define FEATURE_ANYRTTTL_LIB 1 // Use AnyRttl library for RTTTL handling // #define FEATURE_ANYRTTTL_ASYNC 1 // When AnyRttl enabled, use Async (nonblocking) mode instead of the default Blocking mode // #define FEATURE_RTTTL_EVENTS 1 // Enable RTTTL events for Async use, for blocking it doesn't make sense #if FEATURE_CUSTOM_PROVISIONING // For device models, see src/src/DataTypes/DeviceModel.h // #ifdef ESP32 // #define DEFAULT_FACTORY_DEFAULT_DEVICE_MODEL 0 // DeviceModel_default // #endif // #ifdef ESP8266 // #define DEFAULT_FACTORY_DEFAULT_DEVICE_MODEL 0 // DeviceModel_default // #endif // #define DEFAULT_PROVISIONING_FETCH_RULES1 false // #define DEFAULT_PROVISIONING_FETCH_RULES2 false // #define DEFAULT_PROVISIONING_FETCH_RULES3 false // #define DEFAULT_PROVISIONING_FETCH_RULES4 false // #define DEFAULT_PROVISIONING_FETCH_NOTIFICATIONS false // #define DEFAULT_PROVISIONING_FETCH_SECURITY false // #define DEFAULT_PROVISIONING_FETCH_CONFIG false // #define DEFAULT_PROVISIONING_FETCH_PROVISIONING false // #define DEFAULT_PROVISIONING_FETCH_FIRMWARE false // #define DEFAULT_PROVISIONING_SAVE_URL false // #define DEFAULT_PROVISIONING_SAVE_CREDENTIALS false // #define DEFAULT_PROVISIONING_ALLOW_FETCH_COMMAND false // #define DEFAULT_PROVISIONING_URL "" // #define DEFAULT_PROVISIONING_USER "" // #define DEFAULT_PROVISIONING_PASS "" #endif /* ####################################################################################################### Defining web interface ####################################################################################################### */ #define MENU_INDEX_MAIN_VISIBLE true /* #define MENU_INDEX_CONFIG_VISIBLE false #define MENU_INDEX_CONTROLLERS_VISIBLE false #define MENU_INDEX_HARDWARE_VISIBLE false #define MENU_INDEX_DEVICES_VISIBLE false #define MENU_INDEX_RULES_VISIBLE false #define MENU_INDEX_NOTIFICATIONS_VISIBLE false #define MENU_INDEX_TOOLS_VISIBLE false */ #define MAIN_PAGE_SHOW_SYSINFO_BUTTON true #define MAIN_PAGE_SHOW_WiFi_SETUP_BUTTON true #define MAIN_PAGE_SHOW_BASIC_INFO_NOT_LOGGED_IN false #define MAIN_PAGE_SHOW_NODE_LIST_BUILD true #define MAIN_PAGE_SHOW_NODE_LIST_TYPE true #define SETUP_PAGE_SHOW_CONFIG_BUTTON true // #define FEATURE_AUTO_DARK_MODE 0 // 0 = Disable auto-dark mode // #define FEATURE_EXTENDED_TASK_VALUE_TYPES 0 // 0 = Disable extra task value types like 64 bit ints, double, etc. in Dummy tasks // #define FEATURE_USE_DOUBLE_AS_ESPEASY_RULES_FLOAT_TYPE 0 // 0 = switch to float as floating point type for rules/formula processing. //#define WEBPAGE_TEMPLATE_HIDE_HELP_BUTTON #define SHOW_SYSINFO_JSON 1 //Enables the sysinfo_json page (by default is enabled when WEBSERVER_NEW_UI is enabled too) /* ####################################################################################################### CSS / template ####################################################################################################### */ /* #define WEBPAGE_TEMPLATE_DEFAULT_HEADER "

ESP Easy Mega: {{title}}


" #define WEBPAGE_TEMPLATE_DEFAULT_FOOTER "" #define WEBPAGE_TEMPLATE_AP_HEADER "

Welcome to ESP Easy Mega AP

" #define WEBPAGE_TEMPLATE_HIDE_HELP_BUTTON */ // Embed Custom CSS in Custom.h: /* #define WEBSERVER_EMBED_CUSTOM_CSS static const char DATA_ESPEASY_DEFAULT_MIN_CSS[] PROGMEM = { ... ,0}; */ /* ####################################################################################################### Special settings (rendering settings incompatible with other builds) ####################################################################################################### */ // #define FEATURE_NON_STANDARD_24_TASKS 1 /* ####################################################################################################### Your Own selection of plugins and controllers ####################################################################################################### */ #define CONTROLLER_SET_NONE #define NOTIFIER_SET_NONE #define PLUGIN_SET_NONE /* ####################################################################################################### ########### Plugins ####################################################################################################### */ // #define FEATURE_SERVO 1 // Uncomment and set to 0 to explicitly disable SERVO support #define USES_P001 // Switch #define USES_P002 // ADC #define USES_P003 // Pulse #define USES_P004 // 1-Wire Temperature (Dallas/Maxim DS18B20) #define USES_P005 // DHT11/12/22 SONOFF2301/7021/MS01 #define USES_P006 // BMP085/180 // #define USES_P007 // PCF8591 // #define USES_P008 // Wiegand (RFID) // #define USES_P009 // MCP23017 #define USES_P010 // BH1750 #define USES_P011 // ProMini Extender #define USES_P012 // LCD2004 #define USES_P013 // HC-SR04/RCW-0001 #define USES_P014 // SI70xx/HTU21D #define USES_P015 // TSL2561 // #define USES_P017 // PN532 #define USES_P018 // GP2Y10 #define USES_P019 // PCF8574 #define USES_P020 // Ser2Net #define USES_P021 // Level Control // #define USES_P022 // PCA9685 #define USES_P023 // OLED SSD1306 #define USES_P024 // MLX90614 #define USES_P025 // ADS1x15 #define USES_P026 // SysInfo #define USES_P027 // INA219 #define USES_P028 // BMx280 #define USES_P029 // Domoticz MQTT Helper #define USES_P031 // SHT1x #define USES_P032 // MS5611 (GY-63) #define USES_P033 // Dummy Device #define USES_P034 // DHT12 #define USES_P036 // OLED SSD1306/SH1106 Framed #define P036_FEATURE_DISPLAY_PREVIEW 1 // Enable Preview feature, shows on-display content on Devices overview page #define P036_FEATURE_ALIGN_PREVIEW 1 // Enable center/right-align feature when preview is enabled (auto-disabled for 1M builds) #define P036_ENABLE_TICKER 1 // Enable ticker function #define USES_P037 // MQTT Import #define P037_MAPPING_SUPPORT 1 // Enable Value mapping support #define P037_FILTER_SUPPORT 1 // Enable filtering support #define P037_JSON_SUPPORT 1 // Enable Json support #define USES_P038 // NeoPixel #define P038_FEATURE_NEOPIXELFOR 1 // Enable NeoPixelFor/NeoPixelForHSV commands (default enabled for ESP32) #define USES_P039 // Thermocouple // #define USES_P040 // RFID - ID12LA/RDM6300 // #define USES_P041 // NeoPixel (Word Clock) // #define USES_P042 // NeoPixel (Candle) #define USES_P043 // ClkOutput #define USES_P044 // P1 Wifi Gateway // #define USES_P045 // MPU6050 // #define USES_P046 // Ventus W266 #define USES_P047 // Soil moisture sensor // #define USES_P048 // Motoshield v2 #define USES_P049 // MH-Z19 #define USES_P050 // TCS34725 RGB Color Sensor with IR filter and White LED #define USES_P051 // AM2320 #define USES_P052 // SenseAir #define USES_P053 // PMSx003 / PMSx003ST // #define USES_P054 // DMX512 // #define USES_P055 // Chiming #define USES_P056 // SDS011/018/198 // #define USES_P057 // HT16K33_LED // #define USES_P058 // HT16K33_KeyPad #define USES_P059 // Rotary Encoder // #define USES_P060 // MCP3221 // #define USES_P061 // PCF8574 / MCP23017 / PCA8575 // #define USES_P062 // MPR121 #define USES_P063 // TTP229 // #define USES_P064 // APDS9960 Gesture // #define USES_P065 // DRF0299 #define USES_P066 // VEML6040 // #define USES_P067 // HX711_Load_Cell #define USES_P068 // SHT3x #define USES_P069 // LM75A // #define USES_P070 // NeoPixel_Clock // #define USES_P071 // Kamstrup401 #define USES_P072 // HDC1000/HDC1008/HDC1010/HDC1050/HDC1080 #define USES_P073 // 7-segment display #define USES_P074 // TSL2591 // #define USES_P075 // Nextion // #define USES_P076 // HLW8012/BL0937 (Shelly Plug S, Sonoff POW R1, Huafan SS, KMC 70011, Aplic WDP303075, SK03 Outdoor, BlitzWolf SHP, Teckin, Teckin US, Gosund SP1 v23) // #define USES_P077 // CSE7766 (Sonoff S31, Sonoff POW R2, Sonoff POW R3xx(D), Sonoff Dual R3) // #define USES_P078 // Eastron SDMxxx Modbus #define USES_P079 // Wemos / Lolin Motorshield // #define USES_P080 // iButton Sensor DS1990A #define USES_P081 // Cron // #define USES_P082 // GPS #define USES_P083 // SGP30 TVOC #define USES_P084 // VEML6070 // #define USES_P085 // AcuDC24x // #define USES_P086 // Receiving values according Homie convention. Works together with C014 Homie controller // #define USES_P087 // Serial Proxy // #define USES_P088 // HeatpumpIR #define USES_P089 // Ping #define USES_P090 // CCS811 TVOC // #define USES_P091 // Serial MCU controlled switch // #define USES_P092 // DLbus // #define USES_P093 // Mitsubishi Heat Pump // #define USES_P094 // CUL Reader // #define USES_P095 // ILI934x / ILI948x // #define USES_P096 // eInk // #define USES_P097 // ESP32 Touch // #define USES_P098 // PWM Motor // #define USES_P099 // XPT2046 touchscreen // #define USES_P100 // DS2423 counter // #define USES_P101 // Wake On Lan // #define USES_P102 // PZEM-004Tv30-Multiple #define USES_P103 // Atlas Scientific EZO Sensors (pH, ORP, EZO, DO) // #define USES_P104 // MAX7219 dot matrix #define USES_P105 // AHT10/AHT2x #define USES_P106 // BME68x // #define USES_P107 // SI1145 // #define USES_P108 // DDS238-x ZN Modbus energy meters // #define USES_P109 // ThermoOLED #define USES_P110 // VL53L0X Time of Flight sensor // #define USES_P111 // MFRC522 RFID reader #define USES_P112 // AS7265x #define USES_P113 // VL53L1X ToF #define USES_P114 // VEML6075 // #define USES_P115 // MAX1704x // #define USES_P116 // ST77xx #define USES_P117 // SCD30 #define USES_P118 // Itho // #define USES_P119 // ITG3205 Gyro // #define USES_P120 // ADXL345 I2C Acceleration / Gravity // #define USES_P121 // HMC5883L // #define USES_P122 // SHT2x // #define USES_P123 // I2C Touchscreens // #define USES_P124 // I2C Multi Relay // #define USES_P125 // ADXL345 SPI Acceleration / Gravity // #define USES_P126 // 74HC595 Shift register #define USES_P127 // CDM7160 // #define USES_P128 // NeoPixel (BusFX) // #define P128_USES_GRB // Default // #define P128_USES_GRBW // Select 1 option, only first one enabled from this list will be used // #define P128_USES_RGB // #define P128_USES_RGBW // #define P128_USES_BRG // #define P128_USES_BGR // #define P128_USES_RBG // #define P128_ENABLE_FAKETV 1 // Enable(1)/Disable(0) FakeTV effect, disabled by default on ESP8266 (.bin size issue), enabled by default on ESP32 // #define USES_P129 // 74HC165 Input shiftregisters // #define USES_P131 // NeoPixel Matrix // #define USES_P132 // INA3221 #define USES_P133 // LTR390 UV // #define USES_P134 // A02YYUW #define USES_P135 // SCD4x // #define P135_FEATURE_RESET_COMMANDS 1 // Enable/Disable quite spacious (~950 bytes) 'selftest' and 'factoryreset' subcommands // #define USES_P137 // AXP192 // #define USES_P138 // IP5306 // #define USES_P141 // PCD8544 Nokia 5110 LCD #define USES_P142 // Position - AS5600 // #define USES_P143 // I2C Rotary encoders // #define P143_FEATURE_INCLUDE_M5STACK 0 // Enabled by default, can be turned off here // #define P143_FEATURE_INCLUDE_DFROBOT 0 // Enabled by default, can be turned off here // #define P143_FEATURE_COUNTER_COLORMAPPING 0 // Enabled by default, can be turned off here // #define USES_P144 // PM1006(K) (Vindriktning) #define USES_P145 // MQxxx (MQ135 CO2, MQ3 Alcohol) #define USES_P146 // Cache Reader #define USES_P147 // SGP4x // #define P147_FEATURE_GASINDEXALGORITHM 0 // Enabled by default, can be turned off here // #define USES_P148 // POWR3xxD/THR3xxD #define USES_P150 // TMP117 Temperature #define USES_P151 // Honeywell Pressure #define USES_P152 // ESP32 DAC #define USES_P153 // SHT4x #define USES_P154 // BMP3xx I2C // #define USES_P159 // Presence - LD2410 Radar detection // #define USES_P162 // Output - MCP42xxx Digipot #define USES_P163 // Environment - RadSens I2C radiation counter #define USES_P164 // Gases - ENS16x TVOC/eCO2 // #define USES_P166 // Output - GP8403 Dual channel DAC (Digital Analog Converter) #define USES_P167 // Environment - Sensirion SEN5x / Ikea Vindstyrka #define USES_P168 // Light - VEML6030/VEML7700 #define USES_P169 // Environment - AS3935 Lightning Detector #define USES_P170 // Input - I2C Liquid level sensor #define USES_P172 // BMP3xx SPI. #define USES_P173 // Environment - SHTC3 /* ####################################################################################################### ########### Controllers ####################################################################################################### */ #define USES_C001 // Domoticz HTTP #define USES_C002 // Domoticz MQTT #define USES_C003 // Nodo telnet #define USES_C004 // ThingSpeak #define USES_C005 // Home Assistant (openHAB) MQTT #define USES_C006 // PiDome MQTT #define USES_C007 // Emoncms #define USES_C008 // Generic HTTP #define USES_C009 // FHEM HTTP #define USES_C010 // Generic UDP #define USES_C011 // Generic HTTP Advanced #define USES_C012 // Blynk HTTP #define USES_C013 // ESPEasy P2P network #define USES_C014 // homie 3 & 4dev MQTT #define USES_C015 // Blynk #define USES_C016 // Cache controller #define USES_C017 // Zabbix #define USES_C018 // TTN/RN2483 /* ####################################################################################################### ########### Notifiers ####################################################################################################### */ #define USES_N001 // Email #define USES_N002 // Buzzer #endif // ESPEASY_CUSTOM_H